Enables correct, repeatable splicing of longitudinal strip reels, and at the same time makes the operation less labour intensive. The reels are exchanged approximately every 1.45 hours.
The production is easily managed through a Tetra Pak Operator Panel (TPOP) system on the ground level. All major functions can be initiated and supervised - from production preparation to the Cleaning in Place (CIP) function.
The packaging line monitoring system (PLMS) enables tracking of production performance, such as possible stop reasons, efficiencies, waste levels.
Each unit holds a jumbo reel of packaging material with sufficient supply for just above three hours of production when running at the higher speed, and four hours of production at the lower speed. A jumbo reel holds sufficient material for up to 44,000 packages (Tetra Fino® Aseptic 200 ml).
The splicing unit heats and pressurises the packaging material to automatically make a neat seal between one reel and the next, so package production can continue uninterrupted.
Consists of a shallow hydrogen peroxide bath, squeegee rollers and a heating chamber. Rollers distribute the hydrogen peroxide evenly; controlled heating and evaporation give effective sterilisation. Control of aseptic parameters ensures product protection and minimises the risk of operator errors.
The Tetra Pak® A1 for Tetra Fino® Aseptic with IMU is a robust solution, based on proven technologies of Injection Moulding and A1 platform. The flat packaging material with a pre-laminated hole is fed into the IMU and therein the MiM opening is injected through the PLH using the injection moulding technology. The filling machine has a capacity of 9,800 packages/hour.