ENGLISH | TIẾNG VIỆT
The Alfa Laval i-CP100 pump is designed for standard duty applications, like pumping CIP (Cleaning In Place) solutions, utilities, water (processing, heating, cooling), washing machines, simple transport duty within working range.
Alfa Laval i-CP100 is suited for use in the food, dairy, beverage and water industries.
Product detail
| Product code | Alfa Laval i-CP100 |
| Capacity | Up to 80 m³/h |
| Applications | Any application |
Standard design
The Alfa Laval i-CP100 pump consists of a standard motor, stub shaft, mechanical compression coupling, adaptor, back plate, impeller, pump casing and shaft seal.
The Alfa Laval i-CP100 pump is designed for CIP with emphasis on large internal roundings and cleanable seals.
Alfa Laval i-CP100 has a stainless steel shroud for protection of the motor, and the complete unit is supported on four adjustable legs.
Shaft seals
The Alfa Laval i-CP100 pump is equipped with either an external single or a flushed shaft seal. Both have stationary seal rings in acid-resistant steel AISI 329 with sealing surface in silicon carbide and rotating seal rings in carbon. The secondary seal of the flushed seal is a long lasting lip seal.
Technical specifications
| Product code | Alfa Laval i-CP100 |
| Capacity | Up to 80 m³/h |
| Pressure | 400kPa (4 bar). |
Standard materials
| Product wetted steel parts | 1.4403 (304L) |
| Other steel parts | Stainless steel 1.4301 (304), surface treated carbon steel |
| Finish | Blasted (standard), 3A polishing (Ra 0.8) |
| Product wetted elastomers | EPDM (FDA) |
Min/Max speed
| Air evacuation | 2800-3600 rpm |
| Pumping product (no air) | 900-3600 rpm |
Motor
Foot-flanged motor according to the IEC metric standard (EFF II), 2 poles = 3000/3600 rpm. at 50/60 Hz, IP 55 (with drain hole with labyrinth plug), insulation class F.
Documents
